Parameter specification
1 theoretical speed : 18000 / hour (software upgrade speed )
2 is inserted into the defect rate : less than 500PPM
3 insertion direction: 0 - 360 degrees increments of 1 degrees.
4 lead span double spacing 2.5mm / 5.0mm
5 substrate size: the minimum 50mm * 50mm, 450mm * 450mm
6 substrate thickness : 0.79-2.36mm
7 component specification : the maximum height of 23mm, maximum diameter of 13mm
8 element types: capacitor, transistor, the three transistor, LED lights, switches, resistors, connectors, coil, potentiometers, fuse blocks, fuse and so on vertical tape packaging materials.
9 component lead shear pin length: 1.2-2.2mm ( adjustable)
10 component lead bending angle: 10-35 ( adjustable)
11 feeding station number: 60 stations ( pushing the use of station number ), optional ( 10-100 station )
12 machine size ( length * width * height ) : host size 1800mm * 1600mm * 2000mm
13 feeding station size: 500mm * 600mm * 760mm  Machine weight: 14 750KG (40 stations )
15 the use of power: 220V, AC (single ) 50 / 60HZ, 2.0KVA;
16 system protection: uninterruptible power supply ( UPS) configuration, power to run for 15 minutes
17 use of power: 1.6KW ( energy saving )
18 the use of air pressure : 0.6--0.8MPA  With 19 volumes: 0.3 cubic meters / minute
20 use the environment temperature : 5-25
21 : 65 dB noise of machine
22 hole correction : machine vision system, the multi-point MARK vision correction.
23 : AC servo drive system, the AC motor
24 data input mode: USB interface input (EXCEL document format).
25 control system: Chinese operation interface ( WINDOWS system control platform) liquid crystal display
26 element density: high density insert mode
27 stage operation mode : clockwise and counterclockwise
28 circuit board conveying mode: manual / automatic optional