Parameter specification

1 theoretical speed : 24000 / hour

2 is inserted into the defect rate : less than 200PPM

3 insertion direction: parallel 0 degrees, 90 degrees, 180 degrees, 270 degrees.

4 element span : double distance 5.0mm-20mm ( specifically into the jumper can reach 5mm-30mm)

5 substrate size: the minimum 50mm * 50mm, 450mm * 450mm

6 substrate thickness : 0.79-2.36mm

7 element types: capacitors, transistors, diodes, resistors, fuses and other tape packaging materials.

8 jumper ( JW) : independent way of transportation. The diameter of 0.5mm-0.7mm tinned copper wire

9 component lead shear pin length: 1.2-2.2mm ( adjustable)

10 component lead bending angle: 10-35 ( adjustable)

11 machine size ( length * width * height ) : 1800mm * 1600mm * 1800mm Machine weight: 700kg 12

13 the use of power: 220V, AC (single ) 50 / 60HZ, 1.5KVA;

14 system protection: uninterruptible power supply ( UPS) configuration, power to run for 15 minutes

15 use of power: 1.2KW ( energy saving )

16 the use of air pressure : 0.5Mpa  With 17 volumes: 0.2 cubic meters / minute

18 use the environment temperature : 5-25

19 : 65 dB noise of machine

20 hole correction : machine vision system, the multi-point MARK vision correction.

21 : AC, AC servo driving system of motor

22 data input mode: USB interface input (EXCEL document format).

23 control system: Chinese operation interface ( WINDOWS system control platform) liquid crystal display

24 stage operation mode : clockwise and counterclockwise

25 circuit board conveying mode: manual / automatic optional